50–150 mm dia
AC hole cutting
Exact copper-line and drain openings for split, cassette and ducted units. Water-cooled bits, no hammering, no cracked plaster around the sleeve.
- Split & cassette units
- Slope set for drainage
- Same-day slots
Capabilities · Gurugram
Every cut concretecan take.
Six specialist services covering everything from a single AC sleeve to a full slab opening — each priced up front and delivered dust-free.
25–300 mm
Core diameters
600 mm
Max saw depth
Wet cut
Dust-free method
Free
Site survey
Services
Specified, priced and finished properly.
Each service below comes with a defined method, an agreed opening size and a fixed price confirmed before work starts.
Up to 600 mm depth
Slab cutting
Controlled floor and ceiling openings for shafts, staircases, lifts, plumbing risers and expansion joints, cut square with a true edge.
- Shaft & staircase openings
- Rebar-aware cutting
- Debris removed
Vibration-free
Wall cutting
Door, window and HVAC openings sawn through concrete or brick walls while structural integrity and adjoining finishes stay intact.
- Door & window openings
- Concrete or brick
- Clean square reveals
Aligned to duct
Chimney & exhaust
Kitchen chimney and exhaust duct holes set out to your duct run, cut through the external skin and sealed neatly on both faces.
- Duct-run alignment
- External finish sealed
- Kitchen & utility rooms
Reinforced ready
Concrete cutting
Beams, columns, plinths and reinforced sections cut down or opened up with diamond blades for renovation and structural alteration works.
- Reinforced concrete
- Controlled demolition cuts
- Site supervision
25–200 mm dia
Plumbing openings
Waste, water and drainage penetrations through slabs and walls, positioned to your plumbing layout so pipework drops in without chasing.
- Slab & wall penetrations
- Set out to layout
- Sleeve-ready finish
Included as standard
No surprise add-ons at the end.
Every quote already covers the preparation, protection and clean-up that a cut needs. You pay for the opening, not for extras invented on site.
Rebar scan
Structural check before we mark the cut position.
Dust & water control
Sheeting, vacuum capture and wet cutting indoors.
Edge dressing
Openings finished square and ready for fitting.
Debris clearing
Cores and slurry removed from your property.
Next project
Not sure which cut you need?
Describe the job or send a photo of the wall. We will tell you the right method, the opening size and the price.